Brent I need you help.
I copied excatly like you post and configured pi on my local network. The TTL seems to work fine (I can ping it) but I m still enable to communicate with MP over UDP...
Here are my set up in case you see something wrong
- IP wlan0 (pi with edimax adaptor) 192.168.2.177
- ETH0 (pi) 192.168.3.100 (changed subnet to 3)
- TTL 192.168.3.50 on mode UDP server
- IP local laptop : 192.168.2.186 gateway router : 192.168.2.1
I attached a bush of photo so you can double check everything. I can ping from the pi : the TTL, the ETH0, my ip laptop, internet (attached screen shots) from the pi everything wrong from laptop cannot ping the TTL neither the ETH0 but I guess it's normal..no communication from laptop to pi..but the other way yes. I checked the cable to the TTL from the PI, TX => RX , RX => TX ...looks to me a hardware issue but cannot find it.. DroneStart.sh start fine (screen shot) , the UDP redirect seems to show my GGS laptop IP ... can SSH from laptop to pi no problem
don't know what to check next ? thanks for your help